3D Systems

3D Systems Corp. is a holding company, which engages in the provision of comprehensive three-dimensional printing solutions. It offers a comprehensive range of 3D printers, materials, software, haptic design tools, 3D scanners, and virtual surgical simulators. The company was founded by Charles W. Hull in 1986 and is headquartered in Rock Hill, SC.

Earnings data Q4 2020

Earnings data Q1 2021

Earnings data Q2 2021

Earnings data Q3 2021

Earnings data Q4 2021

Earnings data Q1 2022

Earnings data Q2 2022

Earnings data Q3 2022

Earnings data Q4 2022

Earnings data Q1 2023

Earnings data Q2 2023

Earnings data Q3 2023

Earnings data Q4 2023

Earnings data Q1 2024

Earnings data Q2 2024

Earnings data Q3 2024

3D Systems navigates challenges, targets profitability and growth in 2023

3D Systems faced challenges in 2022 but made strategic investments in innovation and operational efficiencies, achieving significant milestones in regenerative medicine and expanding hardware offerings.
Despite a decline in revenue and negative adjusted EBITDA, the company aims for profitability and positive free cash flow in 2023, focusing on growth initiatives and cost management.
Opportunities lie in regenerative medicine initiatives, industrial applications growth, and potential early market access for technologies, while challenges include declining dental market and operational adjustments.
Overall, 3D Systems is positioned to navigate challenges, capitalize on opportunities, and drive financial performance through strategic investments and operational improvements.

3D Systems reports Q1 challenges but sees growth opportunities ahead

3D Systems faced revenue challenges in Q1 2023 due to dental market softness but showed strength in the orthopedic and industrial segments.
Operational improvements, cost-saving measures, and strategic partnerships present opportunities for revenue growth and technological advancement.
Despite challenges in the dental segment, 3D Systems aims for improved financial performance through restructuring, enhanced gross profit margins, and operational efficiencies.
With a focus on innovation, market diversification, and financial optimization, 3D Systems is poised for sustainable growth and competitive positioning in the additive manufacturing industry.

3D Systems reports Q2 revenue dip, eyes Stratasys merger

3D Systems focuses on scale, organic growth, and regenerative medicine for long-term success, despite short-term revenue challenges in dental markets.
The company anticipates positive EBITDA in Q4 2023, with a strong emphasis on cost optimization and margin expansion strategies.
Opportunities lie in the proposed Stratasys combination, bioprinting business expansion, and global traction of the Titan extrusion platform.

3D Systems reports Q3 results, focuses on metal solutions growth

3D Systems is navigating challenges from weak demand and geopolitical risks while focusing on operational improvements and new product launches.
The company's strategic emphasis on metal printing technology and high-quality parts presents growth opportunities in key industrial markets.
Despite near-term challenges, 3D Systems remains optimistic about market share growth, technological advancements, and the personalized healthcare trend.

3D Systems tackles revenue challenges, eyes growth in 2024

3D Systems navigated revenue challenges in 2023 through restructuring and cost-saving initiatives, positioning for improved margins and profitability in 2024.
Despite setbacks in Q4, the company remains optimistic, emphasizing progress updates and a strategic outlook for growth and operational efficiency in the upcoming year.
Challenges from revenue declines, Chinese competition, and market sentiment are countered by strengths in technology differentiation, cost-saving measures, and growth opportunities.
The company's resilience and adaptability in a competitive market landscape are evident in its strategic focus on profitability, growth initiatives, and product launches.

3D Systems reports revenue growth and debt reduction in Q2

3D Systems showed revenue growth in Q2 after a weak Q1, with improved margins
Successful adoption of additive manufacturing and growth in medical devices
Challenges include delayed filings impacting costs and weakness in printer sales
Opportunities lie in sequential sector growth and innovative market developments

Revenue

Cost of revenue

Gross profit

Operating expenses

SG&A

Other

Operating income

EBITDA

Net income

Earnings per share

Total assets

Current assets

Cash & equivalents

Receivables

Inventory

Non-current assets

Net PPE

Intangibles

Total liabilities

Current liabilities

Short term debt

Income tax payable

Non-current liabilities

Long-term debt

Total equity

Stockholders equity

Minority interest

Total liabilities & equity

Total debt

Net debt

Book value per share

Cash from operations

Funds from operations

Change in working capital

Cash from investing

Capital expenditure

Purchase/sale of investments

Purchase/sale of business

Other sources

Cash from financing

Change in stock

Change in debt

Cash dividends paid

Cash from other sources

Net change in cash

Free cash flow

Like many stocks attached to the tech sector, 3D Systems Corporation (NYSE:DDD) has been struggling.

3D Sytems Stock Could See Some Relief Soon

ROCK HILL, S.C., Sept. 16, 2022 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today that management will participate in a panel during William Blair's “What's Next for Industrials” Conference. The panel, titled “Advancing Healthcare Through 3D Bioprinting,” will take place virtually on Friday, September 23, 2022, at 12:00 p.m. Eastern Time.

3D Systems to Participate Virtually at William Blair's “What's Next for Industrials” Conference

3D Systems (DDD) expands its materials portfolio with the introduction of two production-grade solutions, Figure 4 Tough Clear and DuraForm PAx Black, for industrial applications.

3D Systems (DDD) Introduces Two Production Grade Materials

ROCK HILL, S.C., Sept. 12, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced that Andrew Johnson, the company's executive vice president, chief legal officer, is taking on expanded responsibilities as chief corporate development officer. In this role, he will not only lead the company's mergers and acquisitions but will also lead the establishment of new strategic partnerships in support of the company's expanding business needs. Mr. Johnson has been with 3D Systems for more than 16 years, and during this time has led over 60 M&A transactions for the company, and has played a key role in the development of several strategic partnerships. His strategic vision, experience, and knowledge of the additive manufacturing industry make him well suited to take on this expanded responsibility as chief corporate development officer, in addition to his current role as chief legal officer. Mr. Johnson holds a BA from Miami University, an MBA from the Ross School of Business at the University of Michigan, and a JD from the University of Virginia.

3D Systems Announces Appointment of Andrew Johnson as Chief Corporate Development Officer

ROCK HILL, S.C., Sept. 12, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced Figure 4 ® Tough Clear and DuraForm ® PAx Black – two new production-grade materials designed to address a breadth of industrial applications. Both materials have been engineered for long-lasting mechanical performance and stability in any environment making them ideal for a host of end-use applications in industries such as consumer goods, transportation & motorsports, aerospace & defense, and service bureaus.

3D Systems Expands Industry-leading Materials Portfolio with Introduction of New Production-grade Materials

3D Systems' (DDD) newly formed biotech subsidiary, Systemic Bio, intends to accelerate the discovery of pharmaceutical drugs and their development by using advanced bioprinting technologies.

3D Systems (DDD) Launches Startup, Boosts Drug Discovery

ROCK HILL, S.C., Sept. 08, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced the formation of a new, wholly owned company called Systemic Bio ™, a biotech company focused on the application of advanced bioprinting technologies to pharmaceutical drug discovery and development. Systemic Bio will leverage 3D Systems' breakthrough, production-level bioprinting technology to create extremely precise vascularized organ models using biomaterials and human cells. These proprietary organs-on-chips can be manufactured reproducibly in large quantities, and then perfused with any desired drug compound to study drug metabolism and the effects on healthy or diseased tissue at the earliest stages of new pharmaceutical drug development. The ability to accurately simulate human response to an experimental drug in the laboratory, early in the development process, offers the potential to significantly reduce both the high costs and extended times required for pharmaceutical companies to bring a new drug to market. In addition, this approach could eventually reduce or even eliminate the need for animal testing as a precursor to full-scale human trials for new drug development.

3D Systems Announces Formation of New Biotech Company, Systemic Bio™, to Accelerate Drug Discovery and Development

3D Systems (DDD) reported earnings 30 days ago. What's next for the stock?

3D Systems (DDD) Down 16.6% Since Last Earnings Report: Can It Rebound?

Stratasys

The two 3D printing companies recently released their second-quarter results. Here's how they stacked up in a metric-by-metric comparison.

3D Systems vs. Stratasys: Which Had the Better Q2 Earnings Report?

ROCK HILL, S.C., Aug. 18, 2022 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced the appointment of Dr. Toby Cosgrove, former president & chief executive officer of the Cleveland Clinic, and Dr. Bon Ku, director of the Health Design Lab at Thomas Jefferson University, as the fourth and fifth members of the company's recently established Medical Advisory Board (MAB). Dr. Cosgrove and Dr. Ku will join former Health & Human Services Secretary Alex Azar, Dr. Stephen K. Klasko, and former U.S. Secretary of Veterans Affairs David J. Shulkin as members of the advisory board. The Board's primary mission is to provide strategic input, guidance, and recommendations for the company's expanding efforts in regenerative medicine.

3D Systems Announces Appointment of Dr. Toby Cosgrove and Dr. Bon Ku as Members of its Medical Advisory Board

The stock price of 3D Systems (DDD) fell by 14.95% today. This is why.

3D Systems (DDD) Stock: Why It Fell 14.95% Today

Options bulls seem to be capitalizing on 3D Systems Corp's (NYSE:DDD) post-earnings plummet today.

Call Traders Target Crumbling 3D Systems Stock

3D Systems Corporation (NYSE:DDD ) Q2 2022 Earnings Conference Call August 9, 2022 8:30 AM ET Company Participants Russell Johnson - Vice President, Treasurer and Investor Relations Jeffrey Graves - President and Chief Executive Officer Wayne Pensky - Interim Chief Financial Officer Andrew Johnson - Executive Vice President and Chief Legal Officer Conference Call Participants Greg Palm - Craig-Hallum Capital Group Troy Jensen - Lake Street Capital Ananda Baruah - Loop Capital Brian Drab - William Blair Noelle Dilts - Stifel Paul Chung - JPMorgan Chris Grenga - Needham & Company Operator Hello. Good morning and welcome to 3D Systems Conference Call and Audio Webcast to discuss the Results of the Second Quarter 2022.

3D Systems Corporation (DDD) CEO Jeffrey Graves on Q2 2022 Results - Earnings Call Transcript

Why 3D Systems Stock Crashed 14% Today

The 3D-printing company's second-quarter results were hurt by the challenging macroeconomic environment, but its core revenue growth of nearly 8% was fairly solid.

3D Systems Stock Drops 12% on Earnings Miss, Guidance Cut

3D Systems' (DDD) second-quarter 2022 results reflect year-over-year growth and acceleration beyond pre-pandemic levels across Industrial and Healthcare businesses when adjusted for divestments.

3D Systems (DDD) Earnings & Revenues Miss Estimates in Q2

ROCK HILL, S.C., Aug. 08, 2022 (GLOBE NEWSWIRE) -- 3D Systems Corporation  (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2022.

3D Systems Reports Second Quarter 2022 Financial Results

The 3D printing company's stock got a brisk tailwind from the market's strength in July.

Why 3D Systems Stock Jumped 18% in July

ROCK HILL, S.C., Aug. 08, 2022 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced the appointment of Alex M. Azar II, former United States Secretary of Health and Human Services, as the third member of the company's recently established Medical Advisory Board (MAB). Secretary Azar will join Dr. Stephen Klasko, former President and CEO of Thomas Jefferson University and Jefferson Health, and Dr. David Shulkin, former U.S. Secretary of Veterans Affairs, as members of the MAB, the primary mission of which is to provide strategic input, guidance, and recommendations for the company's expanding efforts in regenerative medicine.

3D Systems Announces Appointment of The Honorable Alex M. Azar II to its Medical Advisory Board

ROCK HILL, S.C., Aug. 08, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced that it has entered an agreement to acquire dp polar GmbH, the German-based designer and manufacturer of the industry's first additive manufacturing system designed for true high-speed mass production of customized components. Central to dp polar's patented continuous printing process is a large-scale, segmented, rotating print platform that eliminates the start/stop operations of virtually all additive manufacturing platforms. Traditional printers operate on a Cartesian Coordinate system in which the print head moves sequentially from point to point throughout component production. With dp polar's technology and patented polar coordinate control, the print heads remain stationary above the rotating platform, providing a continuous print process. This approach not only dramatically speeds component production but also minimizes wear and vibration associated with traditional print head motion. With this modular approach, the rotating platform can be mated with a variety of printing technologies and can even accommodate pick-and-place robotic systems that can embed electronics or other features into the body of the component as it is printed. With this acquisition, 3D Systems will leverage its industry-leading polymer materials portfolio as well as Oqton's software technology to bring true high-speed, mass production additive manufacturing to a breadth of industries including aerospace, automotive, foundries, consumer goods, and healthcare.

3D Systems to Accelerate High Volume Additive Manufacturing with Acquisition of dp polar GmbH

ROCK HILL, S.C., Aug. 04, 2022 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today that Michael Turner will join the company as Executive Vice President and Chief Financial Officer, effective August 29, 2022. He will report to President and CEO, Dr. Jeffrey Graves, and will lead the company's global finance organization, including accounting and controllership, financial planning, tax, treasury, and investor relations.

3D Systems Names Michael Turner as Chief Financial Officer

3D Systems has struggled in the past to find its footing in the 3D printing industry, even as it remains an industry leader. Since their strategic restructuring in mid-2020, however, they've begun raking in more contracts and revenues and I now believe they are strategically positioned to outperform.

3D Systems Is Rebounding, Is It Time To Buy?

3D Systems (DDD) collaborates with Fleet Space Technologies to develop radio frequency patch antennas for the latter's Alpha satellite constellation.

3D Systems (DDD), Fleet Space Tie Up for RF Antenna Design

ROCK HILL, South Carolina, July 21, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced a new collaboration with Fleet Space Technologies which has led to the production of innovative RF patch antennas for use on their Alpha satellite constellation. The combination of Fleet Space Technologies' unique design along with the expertise of 3D Systems' Application Innovation Group (AIG) allowed them to architect a complete additive manufacturing solution – which includes process development and bridge production on its DMP Flex 350 – enabling the companies to move from Fleet Space's existing RF patch design to small batch production in just three weeks. Fleet Space Technologies is bringing a DMP Flex 350 printer into service at their headquarters in Beverley, Adelaide allowing the company to bring production of its patch antennas in-house. The printer will be used to create RF patch antennas for each of the Alpha satellites operating in a constellation in low earth orbit as part of Fleet Space Technologies' ExoSphere initiative for mining exploration with minimal environmental impact.

3D Systems Partners with Fleet Space Technologies to Enable Production of Patch Antennas for Next Generation Satellites

3D Systems stock often makes big moves following earnings releases, so investors should be prepared for volatility after the second-quarter report is released.

News for 3D Systems Stock (DDD)