3D Systems

3D Systems Corp. is a holding company, which engages in the provision of comprehensive three-dimensional printing solutions. It offers a comprehensive range of 3D printers, materials, software, haptic design tools, 3D scanners, and virtual surgical simulators. The company was founded by Charles W. Hull in 1986 and is headquartered in Rock Hill, SC.

Earnings data Q1 2021

Earnings data Q2 2021

Earnings data Q3 2021

Earnings data Q4 2021

Earnings data Q1 2022

Earnings data Q2 2022

Earnings data Q3 2022

Earnings data Q4 2022

Earnings data Q1 2023

Earnings data Q2 2023

Earnings data Q3 2023

Earnings data Q4 2023

Earnings data Q1 2024

Earnings data Q2 2024

Earnings data Q3 2024

Earnings data Q4 2024

3D Systems navigates challenges, targets profitability and growth in 2023

3D Systems faced challenges in 2022 but made strategic investments in innovation and operational efficiencies, achieving significant milestones in regenerative medicine and expanding hardware offerings.
Despite a decline in revenue and negative adjusted EBITDA, the company aims for profitability and positive free cash flow in 2023, focusing on growth initiatives and cost management.
Opportunities lie in regenerative medicine initiatives, industrial applications growth, and potential early market access for technologies, while challenges include declining dental market and operational adjustments.
Overall, 3D Systems is positioned to navigate challenges, capitalize on opportunities, and drive financial performance through strategic investments and operational improvements.

3D Systems reports Q1 challenges but sees growth opportunities ahead

3D Systems faced revenue challenges in Q1 2023 due to dental market softness but showed strength in the orthopedic and industrial segments.
Operational improvements, cost-saving measures, and strategic partnerships present opportunities for revenue growth and technological advancement.
Despite challenges in the dental segment, 3D Systems aims for improved financial performance through restructuring, enhanced gross profit margins, and operational efficiencies.
With a focus on innovation, market diversification, and financial optimization, 3D Systems is poised for sustainable growth and competitive positioning in the additive manufacturing industry.

3D Systems reports Q2 revenue dip, eyes Stratasys merger

3D Systems focuses on scale, organic growth, and regenerative medicine for long-term success, despite short-term revenue challenges in dental markets.
The company anticipates positive EBITDA in Q4 2023, with a strong emphasis on cost optimization and margin expansion strategies.
Opportunities lie in the proposed Stratasys combination, bioprinting business expansion, and global traction of the Titan extrusion platform.

3D Systems reports Q3 results, focuses on metal solutions growth

3D Systems is navigating challenges from weak demand and geopolitical risks while focusing on operational improvements and new product launches.
The company's strategic emphasis on metal printing technology and high-quality parts presents growth opportunities in key industrial markets.
Despite near-term challenges, 3D Systems remains optimistic about market share growth, technological advancements, and the personalized healthcare trend.

3D Systems tackles revenue challenges, eyes growth in 2024

3D Systems navigated revenue challenges in 2023 through restructuring and cost-saving initiatives, positioning for improved margins and profitability in 2024.
Despite setbacks in Q4, the company remains optimistic, emphasizing progress updates and a strategic outlook for growth and operational efficiency in the upcoming year.
Challenges from revenue declines, Chinese competition, and market sentiment are countered by strengths in technology differentiation, cost-saving measures, and growth opportunities.
The company's resilience and adaptability in a competitive market landscape are evident in its strategic focus on profitability, growth initiatives, and product launches.

3D Systems reports revenue growth and debt reduction in Q2

3D Systems showed revenue growth in Q2 after a weak Q1, with improved margins
Successful adoption of additive manufacturing and growth in medical devices
Challenges include delayed filings impacting costs and weakness in printer sales
Opportunities lie in sequential sector growth and innovative market developments

Revenue

Cost of revenue

Gross profit

Operating expenses

SG&A

Other

Operating income

EBITDA

Net income

Earnings per share

Total assets

Current assets

Cash & equivalents

Receivables

Inventory

Non-current assets

Net PPE

Intangibles

Total liabilities

Current liabilities

Short term debt

Income tax payable

Non-current liabilities

Long-term debt

Total equity

Stockholders equity

Minority interest

Total liabilities & equity

Total debt

Net debt

Book value per share

Cash from operations

Funds from operations

Change in working capital

Cash from investing

Capital expenditure

Purchase/sale of investments

Purchase/sale of business

Other sources

Cash from financing

Change in stock

Change in debt

Cash dividends paid

Cash from other sources

Net change in cash

Free cash flow

3D Systems' (DDD) first-quarter 2022 results reflect year-over-year growth and acceleration beyond pre-pandemic levels across Industrial and Healthcare businesses when adjusted for divestments.

3D Systems (DDD) Earnings & Revenue Miss Estimates in Q1

Investors weren't thrilled with the company's first-quarter results.

Why 3D Systems Stock Is Falling Today

ROCK HILL, S.C., May 09, 2022 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the first quarter ended March 31, 2022.

3D Systems Reports First Quarter 2022 Financial Results

3D Systems is expected to announce earnings on May 9 after market close. The company seems to be reasonably valued, given it operates in a high-growth industry.

3D Systems: An Opportunity Ahead Of Earnings?

The technology advances with new healthcare and industrial applications, but company struggles for growth

Bear of the Day: 3D Systems (DDD)

ROCK HILL, S.C., April 25, 2022 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced that Jagtar Narula is stepping down as the company's Chief Financial Officer, effective May 20, 2022, to accept a new career opportunity. Wayne Pensky, former chief financial officer of Hexcel Corporation (NYSE:HXL), has been appointed interim CFO, effective May 21. The company has initiated an executive search to identify a permanent finance leader.

3D Systems Announces CFO Transition and Reiterates 2022 Guidance

ROCK HILL, S.C., April 21, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced its entry into the radiation oncology market with FDA 510(k) clearance of VSP ® Bolus, a solution designed to deliver high-quality patient-specific radiotherapy treatment accessories. As the latest addition to the company's VSP portfolio of personalized medical devices, VSP Bolus is the only solution on the market that offers a full design and production service based on the patient's treatment plan. As a result, radiotherapy providers do not need specialized design software and expertise, allowing them to focus directly on patient treatment and care. 3D Systems' deep experience in additive manufacturing of medical devices enables the company to deliver 3D-printed, biocompatible patient-specific boluses that can improve therapy modulation as well as patient comfort.

3D Systems Announces VSP® Bolus to Optimize Radiotherapy Targeting, Improve Patient Experience

3D Systems stock often makes big moves following earnings releases, so investors should be prepared for volatility after the first-quarter release.

3D Systems Earnings: What to Watch on May 9

ROCK HILL, S.C., April 18, 2022 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the first quarter 2022 after the U.S. stock markets close on Monday, May 9, 2022. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, May 10, 2022, at 8:30 a.m. Eastern Time.

3D Systems Announces Date of First Quarter 2022 Financial Results

LOS ANGELES--(BUSINESS WIRE)--Reynolds Advisory Partners, LLC (“RAP” or “Reynolds”) advised Titan Robotics LLC of Colorado Springs, Colorado, in its sale to 3D Systems (NYSE:DDD), of Rock Hill, South Carolina. The transaction closed on April 1, 2022. Titan Robotics is the market leader in pellet-based polymer extrusion 3D printing technology and the only manufacturer offering hybrid tool head configurations. Titan Robotics provides solutions to its customers by developing application-specific p

Reynolds Advisory Partners Advises Titan Robotics LLC on Its Sale to 3D Systems, Adding Unique Extrusion Technology to 3D Systems' Technology Portfolio.

NEW YORK--(BUSINESS WIRE)-- #3D--Bragar Eagel & Squire, P.C., a nationally recognized shareholder rights law firm, is investigating potential claims against 3D Systems Corporation (NYSE: DDD) on behalf of long-term stockholders following a class action complaint that was filed against 3D Systems on April 9, 2021 with a Class Period from May 6, 2020 to March 5, 2021. Our investigation concerns whether the board of directors of 3D Systems have breached their fiduciary duties to the company. The com

3D SYSTEMS ALERT: Bragar Eagel & Squire, P.C. is Investigating 3D Systems Corporation on Behalf of Long-Term Stockholders and Encourages Investors to Contact the Firm

3D Systems (DDD) boosts its portfolio by introducing two new additive manufacturing solutions - SLA 750 and SLA 750 Dual. The company claims these to be its fastest stereolithography printers.

3D Systems (DDD) Introduces New Stereolithography Printers

3D Systems (DDD) reported earnings 30 days ago. What's next for the stock?

3D Systems (DDD) Up 1.8% Since Last Earnings Report: Can It Continue?

3D Systems (DDD) to accelerate the development of additive manufacturing production capabilities in the Kingdom of Saudi Arabia, the Middle East and North Africa.

3D Systems (DDD) Inks an Agreement With Saudi Arabia's Dussur

ROCK HILL, S.C. and RIYADH, Kingdom of Saudi Arabia, March 29, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD), the leading additive manufacturing solutions provider, and the Saudi Arabian Industrial Investments Company (Dussur) have signed an agreement intended to expand the use of additive manufacturing (AM) within the Kingdom of Saudi Arabia and surrounding geographies, including the Middle East and North Africa. The announcement was made during a ceremony in Riyadh on March 29, 2022. The purpose of the new Joint Venture is to enable the development of Saudi Arabia's domestic additive manufacturing production capabilities, consistent with the Kingdom's ‘Vision 2030,' which is focused on diversification of the economy and long-term sustainability. The Center for Innovation and Additive Manufacturing will initially focus on energy, with planned expansions into other industrial sectors as well as healthcare solutions.

3D Systems & Dussur Create Joint Venture to Expand Additive Manufacturing in Saudi Arabia

Desktop Metal

Stratasys

These 3D printing stocks are likely to break out as additive manufacturing comes of age this year. The post 3 3D Printing Stocks to Buy as Additive Manufacturing Goes Mainstream appeared first on InvestorPlace.

3 3D Printing Stocks to Buy as Additive Manufacturing Goes Mainstream

3D Systems (DDD) to accelerate the development of personalized medical devices by partnering with the Intelligent Surgery Ecosystem developer, Enhatch.

3D Systems (DDD), Enhatch Boost Personalized Medical Delivery

3D printing and digital manufacturing solutions provider 3D Systems (NASDAQ: DDD) stock has sold-off over (-60%) from its pandemic high of $56.50.

3D Systems Stock Giving Bargain Opportunities

ROCK HILL, S.C. and HOBOKEN, N.J. and TULSA, Okla., March 23, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD), the leading additive manufacturing solutions partner, and Enhatch Inc, the Hoboken, New Jersey and Tulsa, Oklahoma-based developer of the Intelligent Surgery Ecosystem, announced they have entered a partnership. The technologies which drive Intelligent Surgery streamline and scale the design and delivery of patient-specific medical devices by automating the process. Incorporating these capabilities into 3D Systems' proven workflow for patient-specific solutions—which includes advanced software, expert treatment planning services, custom implants and instrumentation design, and industry-leading production processes—will help more efficiently meet the growing demand for personalized medical devices.

3D Systems Partners with Enhatch to Scale Personalized Medical Device Delivery

The 3D printing company's stock opened nearly 15% higher on Tuesday, but drifted into slightly negative territory by midmorning.

3D Systems Stock Is Struggling Despite Earnings and Revenue Beats

3D Systems' (DDD) fourth-quarter 2021 results reflect year-over-year growth and acceleration beyond pre-pandemic levels across Industrial and Healthcare businesses when adjusted for divestments.

3D Systems' (DDD) Q4 Earnings & Revenues Surpass Estimates

The 3D printer company beat earnings in Q4, then its stock dropped. Wait, what?

Why 3D Systems Stock Popped -- Then Dropped

3D Systems Corporation (DDD) CEO Jeffrey Graves on Q4 2021 Results - Earnings Call Transcript

3D Systems (DDD) delivered earnings and revenue surprises of 200% and 4.33%, respectively, for the quarter ended December 2021. Do the numbers hold clues to what lies ahead for the stock?

3D Systems (DDD) Q4 Earnings and Revenues Beat Estimates

ROCK HILL, S.C., Feb. 28, 2022 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the fourth quarter and full year ended December 31, 2021.

News for 3D Systems Stock (DDD)