Core Molding Technologies

Core Molding Technologies, Inc. engages in manufacturing of sheet molding compound and molding of fiberglass reinforced plastics. It focuses on producing large-format moldings and offers a range of fiberglass processes, spray-up, hand-lay-up, and resin transfer molding. The company was founded in 1996 and is headquartered in Columbus, OH.

Earnings data Q2 2021

Earnings data Q3 2021

Earnings data Q4 2021

Earnings data Q1 2022

Earnings data Q2 2022

Earnings data Q3 2022

Earnings data Q4 2022

Earnings data Q1 2023

Earnings data Q2 2023

Earnings data Q3 2023

Earnings data Q4 2023

Earnings data Q1 2024

Core Molding Technologies reports robust Q1 performance and outlines strategic goals for 2023

Core Molding Technologies' Q1 2023 earnings call showcased strong financial performance, driven by sales growth, improved productivity, and sustainability initiatives. The company faces challenges in its must-win battle for 2023 and capacity expansion plans, while also presenting opportunities in end market outlook and sustainability efforts.

Core Molding Technologies achieves record Q2 results, anticipates market challenges

Core Molding Technologies reported a strong second quarter, marked by record financial performance and diversification benefits in product sales. However, challenges lie ahead with anticipated lower sales and gross margin percent in the second half of 2023. The company is focused on addressing labor challenges and pursuing strategic growth opportunities.

Core Molding Technologies achieves productivity gains but faces sales decline

Core Molding Technologies demonstrated improved productivity and gross margins, but faced challenges with declining sales. The company's focus on sustainability and new contracts in the Technical Solutions segment presents opportunities for future growth. Despite the decline in sales, the company's improved cash flow from operating activities is a positive indicator.

Revenue

Cost of revenue

Gross profit

Operating expenses

SG&A

Other

Operating income

EBITDA

Net income

Earnings per share

Total assets

Current assets

Cash & equivalents

Receivables

Inventory

Non-current assets

Net PPE

Intangibles

Total liabilities

Current liabilities

Short term debt

Income tax payable

Non-current liabilities

Long-term debt

Total equity

Stockholders equity

Minority interest

Total liabilities & equity

Total debt

Net debt

Book value per share

Cash from operations

Funds from operations

Change in working capital

Cash from investing

Capital expenditure

Purchase/sale of investments

Purchase/sale of business

Other sources

Cash from financing

Change in stock

Change in debt

Cash dividends paid

Cash from other sources

Net change in cash

Free cash flow

Strong Performance with Sales of $99.5 million, Earnings per Share Up 43%, Adjusted EBITDA Margin of 12.3% Strong Performance with Sales of $99.5 million, Earnings per Share Up 43%, Adjusted EBITDA Margin of 12.3%

Core Molding Technologies Reports Fiscal 2023 First Quarter Results

COLUMBUS, Ohio, May 04, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced that David Duvall, President and CEO, and John Zimmer, EVP and CFO, will participate in the EF Hutton Global Conference in NYC on May 10, 2023. Investors interested in arranging a one-on-one meeting should contact your conference representative or the Company's investor relations contacts listed below.

Core Molding Technologies to Participate in the Inaugural EF Hutton Global Conference in NYC

COLUMBUS, Ohio, April 26, 2023 (GLOBE NEWSWIRE) --  Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its first quarter fiscal 2023 results on Tuesday, May 9, 2023, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.

Core Molding Technologies Announces Timing of First Quarter Fiscal 2023 Results

Core Molding Technologies, Inc. recently announced solid Q4 FY22 and FY22 results. Their gross profit margins, net income, and revenues have grown significantly in FY22 compared to FY21, and the management has provided optimistic revenue guidance for FY23.

Core Molding Technologies: Financially Sound Stock

Albemarle

Cabot

Li-Cycle Holdings Corp

LyondellBasell Industries

Sociedad Quimica Y Minera De Chile

Univar

Following the surge in oil prices as the Organization of the Petroleum Exporting Countries (OPEC) and non-member oil-producing nations – an alliance known as OPEC+ – the narrative for the most promising battery stocks to buy in April got even more enticing. With rising fuel prices affecting practically everybody, greater interest will focus on advanced energy solutions.

The 7 Most Promising Battery Stocks to Buy in April

TrueBlue

Vipshop Hlds

Enerplus

iTeos Therapeutics, Inc.

Kiniksa Pharmaceuticals Ltd

Perdoceo Education

While it's always nice to get a discount, with cheap stocks, it may be better to go for enterprises sitting in the sweet spot; that is, publicly traded securities that are cheap but not too cheap where investors might fret about possible value traps. On this list, I'm only going to target (as of the time of writing) equity shares that trade between $10 and $20.

7 Dirt-Cheap Stocks Sitting in the Sweet Spot

COLUMBUS, Ohio, March 21, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced the release of its inaugural Sustainability Report, which focuses on its Environmental, Social, and Governance (ESG) approach and strategies.

Core Molding Technologies Releases Inaugural Sustainability Report

Core Molding Technologies, Inc. (NYSE:CMT ) Q4 2022 Earnings Conference Call March 14, 2023 10:00 AM ET Company Participants Dave Duvall - President & CEO John Zimmer - EVP & CFO Sandy Martin - Three Part Advisors, IR Conference Call Participants Chip Moore - EF Hutton Operator Good morning, and welcome to the Core Molding Technologies Fourth Quarter and Fiscal Full-Year 2022 Earnings Conference Call. [Operator Instructions] Please note, this event is being recorded today.

Core Molding Technologies, Inc. (CMT) Q4 2022 Earnings Call Transcript

Record Full Year Sales, Net Income and Adjusted EBITDA Record Full Year Sales, Net Income and Adjusted EBITDA

Core Molding Technologies Reports Full Year and Fourth Quarter 2022 Results

COLUMBUS, Ohio, Feb. 22, 2023 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America, today announces that it will release its fiscal 2022 fourth quarter and year end results on Tuesday, March 14, 2023, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.

Core Molding Technologies Announces Timing of Fiscal 2022 Fourth Quarter and Year End Results

In 2018, the company embarked on an operational turnaround, which led to significant revenue growth and margin improvement. Its long-term goals include reaching annual revenues of $500 million and improving the operating income margin to 10%.

Core Molding Technologies: Turnaround Going Unnoticed Due To COVID-19 And Inflation

Core Molding Technologies, Inc. (NYSE:CMT ) Q3 2022 Earnings Conference Call November 8, 2022 10:00 AM ET Company Participants Steven Hooser - Three Part Advisors, LLC Dave Duvall - President and Chief Executive Officer John Zimmer - Executive Vice President and Chief Financial Officer Conference Call Participants Chip Moore - EF Hutton Mike Hughes - SGF Capital JP Geygan - Global Value Investment Corporation Operator Good morning, everyone and welcome to the Core Molding Technologies Third Quarter Fiscal 2022 Financial Results Conference Call. [Operator Instructions] Please note that this event is being recorded today.

Core Molding Technologies, Inc. (CMT) Q3 2022 Earnings Call Transcript

Record Quarterly Sales of $101.6 million, up 25% Record Quarterly Sales of $101.6 million, up 25%

Core Molding Technologies Reports Fiscal 2022 Third Quarter Results

Core Molding Technologies, Inc. (NYSE:CMT ) Q2 2022 Earnings Conference Call August 9, 2022 10:00 AM ET Company Participants Sandy Martin - IR David Duvall - President and CEO John Zimmer - EVP and CFO Conference Call Participants Chip Moore - EF Hutton Jeffrey Geygan - Global Value Investment Corporation Justyn Putnam - Talanta Investment Group Operator Good morning, everyone. Welcome to the Core Molding Technologies Second Quarter Fiscal 2022 Financial Results Conference Call.

Core Molding Technologies, Inc. (CMT) CEO David Duvall on Q2 2022 Results - Earnings Call Transcript

Record Quarterly Sales of $98.7 million, up 23% Record Quarterly Sales of $98.7 million, up 23%

Core Molding Technologies Reports Fiscal 2022 Second Quarter Results

COLUMBUS, Ohio , June 2, 2022 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company"), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today announced David Duvall, President and CEO, and John Zimmer, EVP and CFO, will participate in the virtual East Coast IDEAS Investor Conference on June 23, 2022. Core Molding Technologies' presentation is scheduled to be available at 6:00 am ET on June 22 nd and will be accessible through the conference site.

Core Molding Technologies to Present Virtually and Host 1x1 Investor Meetings at the 12th Annual East Coast IDEAS Investor Conference on June 22nd & 23rd

Core Molding Technologies, Inc. (NYSE:CMT ) Q1 2022 Results Conference Call May 10, 2022 10:00 AM ET Company Participants Sandy Martin - IR Dave Duvall - President and CEO John Zimmer - EVP and CFO Conference Call Participants JP Geygan - Global Value Investment Corp. Justyn Putnam - Talanta Investment Group Chip Moore - EF Hutton Operator Good morning, and welcome to the Core Molding Technologies First Quarter 2022 Earnings Conference Call. [Operator Instructions] Please note this event is being recorded.

Core Molding Technologies, Inc. (CMT) CEO Dave Duvall on Q1 2022 Results - Earnings Call Transcript

Strong Demand Results in First Quarter Sales of $90.6 million and  Adjusted EBITDA Margin of 10.5% COLUMBUS, Ohio , May 10, 2022 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American:  CMT) ("Core Molding", "Core" or the "Company"), a leading engineered materials company specializing in molded structural products, principally in building products, industrial and utilities, medium and heavy-duty truck and powersports industries across the United States, Canada and Mexico today reports financial and operating results for the fiscal quarter ended March 31, 2022. First Quarter 2022 Highlights Net sales of $90.6 million, up 24% from $72.8 million in the prior year; and product sales of $89.9 million, up 30% from the prior year.

Core Molding Technologies Reports Fiscal 2022 First Quarter Results

COLUMBUS, Ohio , May 3, 2022 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company"), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America and Mexico, today announces that it will release its fiscal 2022 first quarter results on Tuesday, May 10, 2022, before the market opens.  In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.

Core Molding Technologies Announces Timing of Fiscal 2022 First Quarter Results

Core Molding Technologies, Inc. (CMT) CEO Dave Duvall on Q4 2021 Results - Earnings Call Transcript

COLUMBUS, Ohio, March 8, 2022 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company"), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America and Mexico, today reports financial and operating results for the fiscal quarter and year ended December 31, 2021. David Duvall, the Company's President and Chief Executive Officer, said, "Fiscal 2021 was a good year for the Company as we delivered record annual sales of $307 million, an increase of 38% from 2020.

Core Molding Technologies Reports Fiscal 2021 Fourth Quarter and Year-End Results

COLUMBUS, Ohio, Feb. 28, 2022 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American:  CMT) ("Core Molding", "Core" or the "Company"), a leading engineered materials company specializing in molded structural products, principally in building products, utilities, transportation and powersports industries across North America and Mexico, today announces that it will release its fiscal 2021 fourth quarter and full year financial results on Tuesday, March 8, 2022, before the market opens.  In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.

Core Molding Technologies Announces Timing of Fiscal 2021 Fourth Quarter and Year-End Results

COLUMBUS, Ohio, Nov. 5, 2021 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the third quarter ended September 30, 2021. The Company had a net loss of $3.3 million, or ($0.41) per share, for the third quarter of 2021 on net sales of $81.0 million compared to net income of $3.3 million, or $0.39 per share, on net sales of $59.9 million for the same period in 2020.

Core Molding Technologies Reports Q3 2021 Results

COLUMBUS, Ohio, Aug. 6, 2021 /PRNewswire/ -- Core Molding Technologies, Inc. (NYSE American: CMT) ("Core Molding", "Core" or the "Company") today announced results for the second quarter ended June 30, 2021. The Company earned net income of $4.1 million, or $0.48 per share, for the second quarter 2021 on net sales of $80.5 million.

Core Molding Technologies Reports Q2 2021 Results

Processa Pharmaceuticals

REV Group

Vincera Pharma

According to the CEO Buys Screen, a Premium All-in-One Screener template, four stocks that had at least three insider buys including the CEO during the past month are REV Group Inc. ( REVG , Financial), Vincerx Pharma Inc. ( VINC , Financial), Core Molding Technologies Inc. ( CMT , Financial) and Processa Pharmaceuticals Inc. ( PCSA , Financial).

News for Core Molding Technologies Stock (CMT)